Popular Science Appratus Workshops Private Limited

• EDM-80,  (SQUARE)

• DC, Range 0-1, 3, 5, 10, 12, 25, 50, 100, 250, 500Volt
• AC, Range 0-3, 5, 10Volt

• DC with Desk Stand, Range 0-1, 1.5, 3, 5, 10Amp
• AC with Desk Stand, Range 0-1, 3, 5Amp
• DC with Desk Stand, Range 0-15 and 0-25 Amp
• We also have Digital Ammeter & Digital Voltmeter and Digital Galvanometer available.

The glass Petri dish is a shallow, cylindrical, lidded dish made from high-quality borosilicate glass, commonly used in laboratories for culturing microorganisms. It features excellent thermal and chemical resistance, making it ideal for repeated sterilization by autoclaving. Available in various standard sizes (e.g., 60 mm, 90 mm, 100 mm, 150 mm diameter), the dish includes a flat bottom for even sample distribution and a smooth, transparent surface for easy observation. Its durable construction ensures minimal distortion and contamination, essential for microbiological, pharmaceutical, and educational applications.

• The main part has a variable speed motor that turns a belt drive. 
• The belt drive turns a precision bearing shaft. 
• A Motor Drive Module allows the user to vary the bearing speed.
• The bush has pressure tappings equally spaced around its circumference. 
• The tappings connect to a multichannel digital pressure display unit. 
• A speed sensor and the bearing bush load cell connect to the Motor Drive Module. 
• This module displays the bearing speed and the load measured at the load cell.
• The shaft has a high-quality surface finish and spins inside a vertically loaded bush. 
• A hand-operated load control and load cell allow the user to apply and measure the load on the bearing bush. 
• Both the Motor Drive Module and the Pressure Display Module fit into an Instrument Frame that has extra space for the optional frame-mounted VDAS-F. 

• This floor-standing apparatus allows students to study the performance of a journal bearing during different test conditions.
• Students load the bearing by attaching weights to arms connected to the bearing.
• Display shows the motor speed. 
• A control unit adjusts the motor speed, which can run in both directions.
• The clearance is especially large to clearly show the oil in the bearing. 
• Supplied with the equipment is a container of suitable oil. 
• An adjustable reservoir supplies oil to a low pressure region at both ends of the bearing.
• It is a plain steel shaft encased in a clear acrylic shell and directly driven by an electric motor. 
• The bearing is freely supported on the motor shaft and sealed with a rubber diaphragm. 
• The bearing contains 12 equi-spaced pressure tappings around its circumference and four additional ones along its topside and on a vertical radial plane. 
• All are connected by light and flexible plastic tubes to the rear manometer panel, to clearly show the pressure head of oil at all 16 points at all times.

The design is reasonable and the proportion is appropriate, which can accurately indicate the key structural parameters such as key length, key type, and key angle. Versatility.
This model is made up of colorful plastic balls and connecting keys. It has bright colors, excellent craftsmanship, convenient use and durability. 

Science Lab Export, Can formulate the structural formulas of various molecules of inorganic and organic substances in chemistry textbooks. Such as alkane, alkene, alkyne, halide, alcohol, phenol, aldehyde, ketone, ester, etc. in middle school chemistry teaching, and stereoisomerism, optical isomerism and the conversion between them in university teaching materials. 
Like dichloroethylene (C2H2) Cl2, this model can form three isomers at the same time.

Soxhlet Extractor Heating Mantle – Product Description

This heating mantle is constructed with a robust mild steel body and finished with epoxy powder coating, ensuring durability, corrosion resistance, and long service life. It is specially designed to provide an efficient and uniform heating system, making it ideal for Soxhlet extractors and similar laboratory

• Aerosol-tight quick lock Caps rotors for biological safety.
• Speed Setting Selectable in both RPM and RCF.
• Energy-efficient System.
• Condensation Drain Facility.
• Flexibility to Accommodate rotor for Different  format of tubes Starting 2ml to 1000ml. 
• Automatic lid lock during operation and emergency lid release.
• Digital display with Speed ( RPM / RCF ), temp., & with programme operation.
• Low profile design.
• Suitable For Different Size Adapter.
• Automatic rotor imbalance diagnostic with automatic stop.
• Capability of 6 x 250ml.Angle Rotor, 4 x 1000ml. Swing Bucket Rotors.
• Rotor Recognition features for improved safety.
• Centrifuge Programs alerts, error, Status of Centrifuge and Rotors. 
• Capable to information of Number of Cycles, Estimated Hrs., and log of Alerts and Alarm.
• Change of Rotors, While Switching Between Application,  Certified Bio-containment Lids. 
• Pulse Customizable 
• Display Set Parameters together with actual values.
• IQ, PQ and OQ Calibrated Documents.
• 21CFR Part 11 Compliant.

All body made of Stainless steel 304 grade or Aluminum, fitted with Pressure gauge up to 20 PSI. The unit  has spring loaded safety valve for pressure adjustment and a dead weight safety valve, It is hydraulically tested up to 40 PSI and is supplied with Electrically fittings, cord and plug, Supplied complete with Tripod stand. To work on 220/230 Volt AC Supply.

• The U Shape box apparatus is used to determine the filling and passing ability of self-compacting concrete (SCC).
• The U box is made of stainless steel consisting of three 12 mm dia. Rebars.
• The U box is mounted on a frame with a fixing mechanism.
• Reinforcing bar with nominal diameter of 134 mm are installed at the gate with centre to centre spacing of 50 mm. this create a clear spacing of 35 mm between bars.
• The left hand section is filled with about 20 liter of concrete then the gate is lifted and the concrete flows upwards into the other section.
• The height of the concrete in both sections is measured.

• Fill Box Apparatus is used to measure the filling ability of self-compacting concrete with a maximum aggregate size of 20 mm.
• The apparatus consists of a container (transparent) with a flat and smooth surface.
• Dimensions: 500x300x900 mm
• Weight (approx.): 5 kg

• These unadjusted borosilicate glass specific gravity bottles determine the density of liquid samples.
• They have capillary stoppers, and ground Standard Taper joints to reduce evaporation.
• Capacity: 10mL, 25mL (approx)
• Joint: 10/18, 10/18

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific lab equipments manufacturers, scientific laboratory equipments manufacturer, technical educational equipment manufacturer, technical lab equipments manufacturers, tvet lab equipment manufacturers, vocational training lab equipments exporter

Features:

• The mounting block is illuminated from below by a lamp fixed in its housing.
• The aluminum block accepts three capillary tubes and mercury thermometer.
• The temp is regulated by energy regulator fitted to the unit.
• Supplied without capillary tubes and thermometer

• This experiment has three concentric cylinders. 
• The inner cylinder contains an electric heater. 
• The test liquid or gas forms a second, thin cylinder around the heat source. 
• The third cylinder cooled by water surrounds them both to make a heat sink. 
• Assembly is mounted on a base plate with a clear schematic of the experiment layout. 
• Heat passes by conduction from the heat source, through the test liquid or gas, to the heat sink. 
• Thermocouples measure the temperature on the inside and outside edges of the cylinder of test liquid or gas. 

The Single Pan Triple Beam Balance is a robust and highly accurate weighing instrument designed for laboratories, educational institutions, and industrial training centers. This precision balance features three tiered notched beams with centrally positioned sliding weights, allowing direct and easy mass measurement without the use of loose weights for routine applications.

The balance provides a total direct weighing capacity of 610 grams, achieved through three calibrated beams. For higher capacity requirements, two supplementary masses of 1000 g each can be suspended at the end of the beam, extending the maximum weighing capacity up to 2610 grams. When not in use, these supplementary masses can be safely stored in the recessed base, ensuring convenience and preventing loss.

Equipped with a magnetic damping system, the balance ensures rapid stabilization and vibration-free readings, enhancing accuracy and reducing measurement time. The stainless steel weighing pan (150 mm diameter) offers corrosion resistance, easy cleaning, and durability for long-term use.

• From calcium to zinc, some of the many types of minerals that are used in common foods, vitamins, food processing & preserving. 
• Six numbered specimens approximately 1 1/2” x 1 1/2”. 
• For our use of minerals for daily nutrition.

This laboratory gas burner is designed for safe, efficient and controlled heating applications in educational and research laboratories. It is supplied with one spare gas nipple, making it suitable for use with LPG gas as well as standard gas connections. The inclusion of a precision stopcock allows the gas flow to be completely shut off when required, ensuring enhanced safety during operation and when the burner is not in use.

These polycarbonate safety goggles are designed to provide dependable eye protection for laboratory, industrial, and educational environments. The high-strength polycarbonate lens offers excellent impact resistance while remaining lightweight for comfortable, long-term use.

An adjustable elastic strap ensures a secure and customized fit for different users, helping the goggles stay firmly in place during work. The design allows clear vision and effective protection against dust, splashes, and flying particles.

The Vacuum Oven (Cylindrical Type) is designed for laboratory and industrial applications that require controlled heating under vacuum or inert gas conditions. It provides gentle and uniform heat distribution, making it suitable for drying, degassing, curing, and processing heat-sensitive materials.

The Rectangular Water Bath is a precision-controlled laboratory heating device designed for applications requiring uniform and consistent temperature distribution. It is ideal for sample incubation, chemical reactions, and microbiological studies, ensuring reliable and repeatable results.

The Vacuum Oven (Cylindrical Type) is designed for laboratory and industrial applications that require controlled heating under vacuum or inert gas conditions. It provides gentle and uniform heat distribution, making it suitable for drying, degassing, curing, and processing heat-sensitive materials.

The 3-point crucible clamp is designed for secure and precise clamping of crucibles during laboratory heating processes. Its ring features three guide sleeves pointing toward the center, allowing the clamping rods inside the sleeves to be adjusted or scrolled to fit different crucible sizes.

This clamp is ideal for heating substances over a gas flame, providing stability and safety. It can accommodate crucibles from 0–70 mm and is also suitable for platinum crucibles. The clamp is compatible with support stands or tripods, allowing the distance between the gas flame and crucible bottom to be easily adjusted for controlled heating.

Automated Hematology Analyzers are advanced diagnostic instruments designed for fast, accurate, and reliable blood analysis. These systems are widely used in hospitals, clinics, and pathology laboratories to perform Complete Blood Count (CBC) tests with minimal manual intervention. The analyzer automatically evaluates red blood cells (RBC), white blood cells (WBC), platelets (PLT), hemoglobin (HGB), hematocrit (HCT) and related parameters, ensuring consistent and precise results.

With an 8-inch color touch screen LCD, multi-language support, and large data storage, the analyzer offers user-friendly operation and efficient workflow. It supports venous, capillary, and prediluted samples, making it suitable for diverse clinical needs. Built-in quality control and calibration features ensure accuracy and compliance with laboratory standards.

We manufacture the product at par with IP 33 and IP 170 also IS 1448 (Part I) 1985 (P: 20) standards. Abels Flash Point Apparatus is ideal for use for determining the close cup flash point of petroleum and mixtures. It is also used for oil whose flash temperature is below 70 C. An Electric Heater is fitted at bottom for operation.

Additional product accessories are:

• Oil Cup
• Cover fitted with stirrer
• Thermometer socket S.S Water Bath
• Stand

Other models included are:

We also provide Optional Accessories:

• Abel Oil Cup Thermometer(-35/700Cx005C) (IP 74 C)
• Abel Water Bath Thermometer (-30/800Cx005C) (IP-75 C)- Size 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11 and with spare cup for above apparatus- Size 15, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500 and 600.
• Spare Top (Cover assemble) with shutter mechanism- Size 100,150, 200, 300, 350, 400, 450, 500 and 600
• Spare Nichrome heating Element- Size 1, 1A, 2, 2A, 3, 3A and 4
• Pendulum for Measuring Time in Strokes
• Concealed Hot Plate with Housing

Consisting of a transformer 20 AMP (Series Model), S.S. furnace insulated with ceramic fiber and a wooden frame for glass parts. Thermocouple Pt/Re, Pyrometer etc.