Opposite Kali Bari Mandir Gate, Ambala, Haryana
GST No. 06AAECP4322R1Z3
Send E-mail
Call 0804538467781% Response Rate
Home»Our Products»

Physics Lab Equipment New

Physics Equipments Manufacturers and Instruments Exporter, Physics Lab Instruments such asGenerator, Electrostatics, Mechanics and Educational models of Physics Lab Equipment, Physics Lab apparatus, Educational Scientific Equipments & Educational Science Products. Ambala, Haryana, India , Ambala Cantt

REQUEST CALLBACK
Get Best Quote

Approx. Rs 86,000  / EACH Get Latest Price

• Synchro transmitter-receiver pair with calibrateddials• Locking system for receiver rotor• Receiver use as control transformer• Built-in balanced demodulator circuit• Panel meter for AC/DC voltages• Only an external CRO required
Additional Information:
  • Item Code: 2260
  • Minimum Order Quantity: 1 EACH
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 44,500  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
Model Name/Number2261
Country of OriginMade in India
Specifications• LVDTRange:±50mm or total 100mmSensitivity: 25mV/cmOperating frequency: 5KHz±5%• Displacement measurement on a mm scale with fineMotion control• Carrier source (internal): 5KHz±5%; 1.5V (nominal)• Built-in 3½ digit DVM for output reading• IC based balanced demodulator circuit• IC controlled internal power supplies• Essential accessory
Additional Information:
  • Item Code: 2261
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 32,600  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Model Name/Number2266
BrandPSAW
Country of OriginMade in India
Specifications Active RLC network using 3-Op Amps Damping 1.1-0.1(approx) SquareWave 35-700 Hz., 0-1V (typical) SineWave 35-700 Hz., 0-1V (typical) Essential Accessory- a CRO
Additional Information:
  • Item Code: 2266
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 40,600  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
Model Name/Number2267
BrandPSAW
Country of OriginMade in India
Specifications• Simulated first, second and third order system oftype-0 and type-1• Calibrated variable gain amplifier (Resolution 1 :1000)• Built-in signal sources:Square wave and TriangularFrequency : 45-90HzAmplitude : 0-2.5V approximately• Trigger output for perfectly steady display on CRO• Uncommitted amplifier for phase adjustment• Provision for disturbance inputs• Complete in all respect, except a measuring CRO
Additional Information:
  • Item Code: 2267
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 32,000  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandPSAW
Country of OriginMade in India
• High quality servo-potenteometers of 360º shaftrotation• Requires an external CRO for a.c. Studies• Built-in signal and power sources• 3½ digit DVM for measurements
Additional Information:
  • Item Code: 2268
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 40,000  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandPSAW
Specifications• Built-in 3½ digit DVM• Built-in IC regulated power supplies• Literature and patch cords included• Seven lamps 6V/300mA• 5Hz square wave and triangular wave for dynamicResponse study• Complete in all respect, except a measuring CRO
Additional Information:
  • Item Code: 2269
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 31,000  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
Model Name/Number2271
BrandPSAW
Specifications• Speed range : L:50-2000 rpm, M:50-6000 rpm,H:50-12000 rpm• Crystal controlled accuracy• Mains Operation• Display : 5 digit LCD• Freq. Control : Fine & Coarse•Weight : Approx. 1 kg.• Portable Model with strong plastic body•With carrying case
Additional Information:
  • Item Code: 2271
Products & Services
REQUEST CALLBACK
  • Maxwells Vibration Needle Graduated
  • Maxwells Vibration Needle Graduated
Get Best Quote

Approx. Rs 3,980  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Country of OriginMade in India
It consists of a hollow cylindrical brass tube open at both ends provided with a small chuck (torsion head) in the middle of which is fixed a plane mirror. The length of the hollow brasstube is 40cm, diameter is 18cm and graduated with scale divided in millimeters on both sides from 0 to 15cm and with vernier to read 0.05mm. Two solid brass cylinders and two hollow brass cylinders, all of length 10cm long are provided so that when place end to end, they fill the hollow tube completely. Supplied with superior quality clamp of Cat. No. 2316
Additional Information:
  • Item Code: 2300
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1,870  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
Model Name/Number2302
BrandPSAW
Rigidity Apparatus (Searle’s Pattern) One can find the modulus of rigidity and Young’s modulus for the material of a wire by Searle’s method. The 30cm long wire under test is connected to two brass rods about 30 cm long at their mid points by two screws fitted at the ends of the wire. The rods are suspended from hooks. Complete with three test wires and connecting screws.
Additional Information:
  • Item Code: 2302
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 3,550  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
Model Name/Number2315
Country of OriginMade in India
Torsion Pendulum (5” Brass Disc) The torsion pendulum is an interesting example of simple harmonic motion, often overlooked by students. It is helpful in explaining the meaning of moment of inertia and moment of torsion and how they affect the period of vibration. The one end of suspension wire hangs from a Universal Clamp with the help of a chuck nut and the other end is clamped to a solid brass disc of 12.5cm dia and 1.25cm thick with the help of a chuck nut. A heavy metal ring of the same metal (brass) and the same outside diameter as the disc is included. When ring is placed on the disc, the moment of inertia, and therefore the period of vibration of the system, is Increased. Supplied with universal clamp of Cat. No. 2316.
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,890  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Model Name/Number2317
Consists of an aluminum disc 25 cm diameter. Another small disc of iron C.P. having same diameter as the interior of agrooved area of the bigger disc. (the small disc has approx. 8 cm dia and 1.25 cm thickness). A tall UShape metal bridge with a split chuck, fitted into disc enable accurate suspension and torsion. Article of irregular dimension as large as brick can also be inserted in the UShaped  suspension. Supplied with wall bracket.
Additional Information:
  • Item Code: 2317
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 5,680  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
Country of OriginMade in India
Torsion Apparatus Searle’s Horizontal Pattern (Half Meter Long) Two cast iron feets each with 3 through holes and grub securing screws, separating by two support rods approx 600mm long, one of which is graduated in cm and mm. The wheel 165mm dia. over groove moving on ball bearings is provided with chuck to hold the test rod of 55cm long and 5mm dia with two aluminum scales graduated 30-0-30 in single degrees, mounted on pillar support, which are adjustable along the rod, two pointers with clamp for attaching to specimen, on each of brass and steel rods, cord and hook for carrying masses. Supplied without weights.
Additional Information:
  • Item Code: 2322
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 1,270  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
Country of OriginMade in India
It consists of a half meter aluminum strip with stone agate knife edge at the centre. The aluminum strip is first black painte and after that it is screen printed as 25-0 25cm with zero at the centre. Two plastic hooks, which move along the aluminum meter scale, are also provided. These plastic hooks are used for carrying brass slotted weights. Supplied w/o weight
Additional Information:
  • Item Code: 2365
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 24,200  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
Country of OriginMade in India
For experimentally verifying the laws of triangle, parallelogram and polygon of forces. Comprising of a circular 40cm diameter aluminium disc, graduated into 360 degrees. Complete with levelling screws, clamping devices to fix the table at any desired angle, five sliding clamp, pulleys, central ring, string and five sets of iron nickelled slotted weights, each setcontaining nine weights and one hanger of 50gms each
Additional Information:
  • Item Code: 2368
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 3,500  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
BrandPSAW
Country of OriginMade in India
It consists of an aluminum disc of approximately 6” dia with a groove. The circular aluminum disc supports five semicircular masses which just fit into a groove, concentric with the circumference. It can be suspended by a steel wire pivoted at the centre of a long frame work, provided with circular base which is also fitted with leveling screws. Supplied with four different shapes of masses (Rectangular, Square, circular and triangular.)
Additional Information:
  • Item Code: 2372
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 1,330  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
Model Name/Number2380
Country of OriginMade in India
Dr. Searle’s design. It is a famous instrument for determining the Young’s modulus of a wire and is indispensable where most accurate measurements are desired. The instrument consists of two iron frames connected by a link. The frames are fittedwith self centering chucks. An accurately graduated micrometer screw to read 0.01mm is fitted on a frame. One end of a sensitive spirit level is pivoted to one of the frame, the other end on the points of a micrometer screw is fitted inother frame. Complete with iron C.P. Chucks, cast iron ceiling attachment and torsion weight but w/o velvet case.
Additional Information:
  • Item Code: 2380
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,200  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
BrandPSAW
Model Name/Number2390
Country of OriginMade in India
This is an economical form of inclined plane consisting of 60×10cm board either with glass top or sunmica top, hinged to the base board of size 45×10cm. The pulley is attached to one end of the upper board. The upper board (plane) can be set at any angle by clamping the wing nut. Complete with graduated aluminum arc and iron N.P. Roller. Supplied with wooden carriages of 10x10cm with look for determine the force of friction.
Additional Information:
  • Item Code: 2390
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 4,150  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
BrandPSAW
Model Name/Number2392
Country of OriginMade in India
Heavy cast Iron base 45×15×2.5cm thick hinged to wood. Plane comprising two wood strips 47.5×6.2×2cm thick, 2 cm apart, rigidly jointed at ends by metal cross pieces. One strip with 5 cm extension carrying a clamp for holding pulley at any angle. Aluminum pulley 4.5cm in diameter on stem 15cm long. The angle can be read in degrees and the hypotense and vertical height of the force triangle can be read in cm directly from the scale on the sides. The plane can be inclined up to 45degrees. Supplied with iron roller and S.S. scale pan.
Additional Information:
  • Item Code: 2392
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 4,150  / EACH Get Latest Price

Product Details:
BrandPSAW
Model Name/Number2392
Country of OriginMade in India
Heavy cast Iron base 45×15×2.5cm thick hinged to wood. Plane comprising two wood strips 47.5×6.2×2cm thick, 2 cm apart, rigidly jointed at ends by metal cross pieces. One strip with 5 cm extension carrying a clamp for holding pulley at any angle. Aluminum pulley 4.5cm in diameter on stem 15cm long. The angle can be read in degrees and the hypotense and vertical height of the force triangle can be read in cm directly from the scale on the sides. The plane can be inclined up to 45degrees. Supplied with iron roller and S.S. scale pan.
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 450  / EACH Get Latest Price

Product Details:
Minimum Order Quantity1 EACH
BrandPSAW
The apparatus comprises a metal frame, on which three capillary tubes of 10cm long Borosilicate glass and of different internal diameters are clamped with the help of small metal brackets. The 9mm rod is also attached to a metal plate, so that the complete clamp can be held in any stand for determining the surface tension of liquid by capillary rise method.
Additional Information:
  • Item Code: 2410
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 260  / Each Get Latest Price

Product Details:
Minimum Order Quantity10 Each
BrandPSAW
TypeAnalog
Model Name/NumberPSAW13
Range0.01cm
Accuracy0.001cm
Size15x1
Usage/ApplicationMeasurement
MaterialStainless Steel
Country of OriginMade in India
The barrel and yoke are both nickel plated and the rod is made from proof stainless steel Individually packed in a beautiful cardboard steel individually packed in a beautiful cardboard box with detailed working manual. 
A) 15x1mmB) 20x1mmC) 25x1mmD) 15x½ mmE) 20x½ mmF) 25x½ mm

Additional Information:
  • Production Capacity: 5000 Pieces
  • Delivery Time: Ready Stock
  • Packaging Details: Card Board Box
Products & Services
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 690  / Unit Get Latest Price

Product Details:
Minimum Order Quantity1 Unit
Country of OriginMade in India
It consists of a support with mounted millimeter scale, a spiral spring, a hanger for weights. The scale is 12cm long, engraved on a plane mirror to permit parallax illumination by reflection and mounted with elevation adjustment on a support rod. The steel spring 1cm in diameter and 3 cm long when unstretched is suspended from a hook above the scale.Weights not included.
Products & Services
REQUEST CALLBACK
Get Best Quote

Approx. Rs 4,100  / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandPSAW
It consists of a brass beam 9mm square, one meter long, resting on the knife edges of two heavy table G-clamps. A sharp knife edge with hanger rest on the beam. Two tilting type mirrors (like optical lever) are also provided for this apparatus supplied w/o weights.
Products & Services
X
 

Download Brochure
Explore more products
Corporate Information
Share Us
Rammurti Verma (Director)
Popular Science Apparatus Workshops Pvt. Ltd.
3724, Opposite Kali Bari Mandir, Ambala Cantt
Opposite Kali Bari Mandir Gate, Ambala - 133001
Haryana, India
Send Email
© Popular Science Apparatus Workshops Pvt. Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited