Oil and Petroleum testing Equipments
|Maximum Viscosity Range||2.0 mm2/s|
Softening Point Apparatus PSAW 2561
(Ring & Ball Apparatus)
For determination of softening point of bituminious materials according to IP 58 and IS 1205-1958. Softening point is that temperature at which the speciman under test becomes soft enough to allow a steel ball of specific dimensions to fall a required distance under test condition. The apparatus consists of glass beaker, ring Stand, two steel balls with
rings and ball guides, hand Stirrer.
|Operating Voltage||220 V|
|Protection Class||IP 70|
|Redwood Viscometer Flow||20 to 2000 seconds|
Redwood Viscometer PSAW Electrically operated, these viscometers are designed for viscosity tests of petroleum products. They confirm to requirements. Two adaption of redwood viscometer are available. The complete outfit comprises stainless steel bath with electrical heating arrangement suitable, fitted with tap, silver plated oil cup cover, ball valve and thermoteter-clip, stirrer and mild steel stand with levelling screws. Electrically heated with energy regulated for temperature control.
Tar Viscometer Multiple Apparatus PSAW 2511
|Model Name/Number||PSAW 2511|
Consist 2 cups in a S.S. Water Bath mounted on Stand with levelling feet. Fitted with 1000 watts heater. Temperature is controlled by DIGITAL ELECTRONIC CONTROLLER with F.H.P. electric motor Stirrer. Supplied with one Tar Cup 10mm and one 4 mm orifice with Valves.
ABELS FLASH POINT APPARATUS PSAW 2520
|Model Name/Number||PSAW 2520|
This apparatus is suitable for determining the close cup flash point of petroleum and mixtures according to IP 33 and IP 170 and also IS 1448 (Part I) 1985 (P:20). It is suitable for oils whose flashes below 70oC. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220 Volts AC Circuits.
Carbon Residue Apparatus PSAW 2550 A
|Model Name/Number||PSAW 2550 A|
It is made as per IP 13, ASTM D- 189 Specifications . It is useful to determine amount of Carbon Residue when an oil is evaporated under Specified Conditions. The apparatus consists of spun sheet iron crucible 25 c c Capacity, Sheet Iron hood and sheet iron block on a stand, gas Burnor.
Rotary Microtome (Erma Type) PSAW-289
This microtome is required with a ball ban lange type object holder to get exact of spiceman knife holder with lateral movement permitting use of one complete knife ege and has feed range from 1.25 micromes in step of one microme.
Redwood Viscometer No. 1 PSAW 2501
|Model Name/Number||PSAW 2501|
REDWOOD VISCOMETER NO. 1 These viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70 (Former). Two adaption of Red Wood viscometer are available No. 1 for liquids having Red Wood flow 20 seconds to 2000 seconds and No. II for liquids whose flow time exceeds 2000 seconds. The complete out fit comprises Stainless steel bath with electrical heating arragment suitable to operate at 220 Volts AC Mains with tap, oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and M.S.Sheet stand Special Feature : S.S. Bath made of Spun Sheet one piece Joint less.
Cleaveland Flash Point & Fire Point Apparatus PSAW 2532
|Model Name/Number||PSAW 2532|
This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80oC as per specification IP 36 and IS: 1448 (P: 69) 1969. The apparatus consists of a cup, heating plate to spectific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for aperation on 220 Volts 50 cycles AC Circuits.
Redwood Viscometer Multiple Apparatus PSAW 2509
|Model Name/Number||PSAW 2509|
It consists, One Red Wood No.1 cup and One Red Wood No. 2 cup are installed in the bath. The bath is made from S.S. Sheet The temperature is Controlled by Electonic Digital Temperature Controller. The Stirring is done by FHP electric motor in the heating compartment. The unit has 2 sets of Oil Cup covers, thermometer Clips and ball valve.Suitable to operate on 220 volts AC Circuits.
Flow Cup Viscometer PSAW 2519
|Model Name/Number||PSAW 2519|
This type of cup has been in popular use for many years and confirms
to IS 3944-1965 specifications. These are available in following sizes. Jet No. B-1, B-2, B-3, B-4, B-5 & B-6.
Tar Viscometer Apparatus Psaw 2510
|Model Name/Number||Psaw 2510|
As per IP 72 and is 1206 standards. It is used for determination the viscosity of road oils and cut back bitumen. It consists S.S. Bath with cup of 10 mm or 4mm orifice and sleeve, Stirrer with lifting clip and ball. The assembly kept on Suitable stand with levelling Screws. Suitable to operate on 220 Volts AC Mains.
Drop Point Of Grease Apparatus PSAW 2564 A
|Model Name/Number||PSAW 2564 A|
[ As per IP 31 and 132 and ASTM D-566 Specifications]
As per IP 31 the apparatus Consists of Brass Sleeve and case with metal cup and a glass Boilling tube with Crok fitted to a bath 600 ml beaker is provided. The assembly is kept on heater with energy Regulator control and stand with F.H.P. elect Stirrer. As per IP 132 the unit Comprises a glass beaker with fibre Cover together with glass test tube with three identations to receive Chromium platedd brass cup. cork for tube and a 1.5 mm diameter Brass rod. The assembly is kept on heater with energy regulator and stand with F.H.P. motor stirrer.